A lever that doesn’t slip even when you’re wearing gloves, a hook that doesn’t mark the garments hung on it, a protective layer that prevents damage in transit: these are all examples of rubber coating for metal, the application of a soft, elastic layer to a metal component.
In this article we look at how it is done, what problems it solves and what to consider at the design stage. AGB Plast has been providing contract rubber coating since 1983, for sectors ranging from industry to fashion.
What rubber coating is
The term “rubber coating” describes a coating that looks and behaves like rubber: soft, elastic and pleasant to the touch. In most industrial cases it is achieved with plastisol dip coating: the hot metal part is dipped into the liquid material, which adheres to it, and then goes into an oven where the coating consolidates.
The result is a continuous, seamless layer that follows the shape of the part and can be several millimeters thick. The differences from other coating technologies are explained in our article plastisol dip coating, fluidized bed or powder coating.
The problems it solves
Grip and slip resistance
On levers, handles, pedals and grips, bare or painted metal slips, especially with wet or oily hands or when wearing gloves. A rubbery layer improves grip and makes use safer and more comfortable.
Protection against impact and scratches
Rubber coating cushions knocks and protects both the part and whatever it comes into contact with: delicate surfaces, painted products, garments, other components in transit. That is why it is used on hooks, supports, separators and shock-absorbing systems.
Noise and vibration
The elastic coating dampens metal-on-metal contact: less noise, less transmitted vibration, less wear at contact points.
Insulation
The plastic layer provides electrical insulation and reduces the cold feel of metal to the touch. It is used, for example, on components of electrical equipment, hand tools, electrical circuit components and safety systems.
Appearance and recognizability
The color of the coating helps distinguish variants and functions (a red emergency lever, for example) and can carry the customer’s brand through pad printing.
Where it is used: real examples
| Application | Why rubber coating |
|---|---|
| Valve levers, including small batches | Secure grip and hand protection; small batch sizes are not a problem with dip coating |
| Hanger hooks | They don’t mark garments and don’t slip |
| Chains and fashion accessories | Distinctive look and feel, custom-matched colors |
| Bike parking station components | Resistance to weather and corrosion, protection for the bikes |
| Automotive seat and container components | Cushioning and surface protection |
| Accessories for professional coffee machines | Wear resistance and a finish consistent with the machine’s design |
Some of these projects are described in the AGB Plast case studies.
What to decide at the design stage
- Hardness and feel. Finishes range from very soft to firmer coatings: compounds are produced in different hardnesses depending on requirements, and a dedicated compound needs volumes that justify it.
- Thickness. More thickness means more cushioning, but also different dimensions: holes and fits must be designed accordingly. The right thickness is defined case by case, based on the item.
- Areas to leave uncoated. With partial dipping or masking, only the part that needs it is coated, for example the handle of a lever.
- Color and branding. Colors can be customized; logos and text are applied by pad printing in 1 or 2 colors.
- Operating environment. Outdoor use, contact with oils or detergents, high temperatures: all of these affect the choice of material. Standard coatings work continuously up to 80 °C; for higher temperatures a technical product rated up to 150 °C is available.
- Compliance. For consumer products it is worth asking for REACH declarations and, where needed, phthalate-free formulations.
In-house or outsourced rubber coating?
A dip coating line requires ovens, tanks, fixtures to hold the parts and staff experienced in controlling process parameters. For most companies it makes sense to rely on a specialist contract coater, provided it can:
- adapt or design fixtures to hold the parts during dipping;
- also handle the steps before (sandblasting, electroplating, painting) and after (pad printing, assembly);
- work on prototypes and small batches as well as series production;
- keep lead times and production under control. At AGB, production is monitored by an ERP system and by planning and scheduling software that track machine use, and we work with trusted, selected suppliers: that is how we ensure reliable delivery dates.
Frequently asked questions
Does rubber coating wear off with use?
Like any coating it wears, and how long it lasts depends on the application: abrasion, environment, substances it comes into contact with. Uses vary so much that there is no single lifetime that applies to all: we assess it with you based on the intended use.
Can a painted or galvanized part be rubber coated?
Yes, but the painting and electroplating carried out before plastic coating must be carefully checked. That is why AGB works with a controlled supply chain, which makes it possible to combine these treatments without problems.
What is the minimum batch size?
We work from sampling runs of just a few parts, even 5–10, up to series of more than 100,000 parts.
Do you have a component that needs rubber coating?
Send us a drawing, a sample or photos with some information on the intended use: we will suggest the right hardness, thickness and finish, with a free quote within 48 hours.