A lever that doesn’t slip out of your hand, a handbag chain with a colored, soft-touch finish, a coffee machine component that won’t scratch even after thousands of cycles. Behind all of these items is the same process: metal plastic coating, also called metal plasticization, the application of a layer of plastic material to a metal part to protect it, insulate it or make it more comfortable to use.
In this guide we explain how the process works, how it differs from powder coating and fluidized bed coating, which metals can be coated and how to tell whether it is the right solution for your product. We do so drawing on more than 40 years of experience: AGB was founded in 1983 as a contract plastic coater for the faucet and valve industry.
What metal plastic coating is
Plastic coating (also called plasticization or, for the softest finishes, rubber coating) means covering a metal item with a continuous layer of thermoplastic material. The metal keeps its structural function, while the coating adds properties that metal alone does not have: insulation, grip, softness, color, and protection against impact and corrosion.
The most widely used material for dip coating is plastisol: a suspension of PVC particles in a liquid plasticizer, with added stabilizers and pigments. At room temperature it is a fluid; when heated, the particles absorb the plasticizer and fuse together, forming a solid, flexible and well-bonded layer.
A note on terminology. In search results, “plasticization” can also refer to laminating paper sheets and prints, or to the plasticizing unit of injection molding machines. Here we are talking exclusively about plastic coating of metal items.
How it works: the stages of the process
Every project has its own parameters, but the plastisol dip coating cycle generally follows these stages:
- Surface preparation. The part is cleaned and, where needed, sandblasted, tumbled or electroplated. This is the stage that most affects adhesion and the life of the coating.
- Primer application. Where necessary, an adhesion promoter is applied between metal and plastic: whether to use one, and which, depends on the purpose of the coating and on the customer’s requirements.
- Preheating. The part is brought up to temperature: the hotter it is and the longer it stays immersed, the thicker the coating.
- Dipping. The part, held by fixtures suited to its shape, is fully or partially dipped in plastisol. Dipping also reaches cavities, edges and areas that are hard to cover with spray methods.
- Gelling and curing. In the oven, the plastisol fuses and consolidates; for the most common formulations fusion takes place at around 180 °C, while times vary widely depending on the item.
- Cooling and inspection. The part cools down, is released from the fixture and inspected (thickness, uniformity, appearance).
- Finishing and customization. Trimming, pad printing of logos and text, assembly.
Dip coating, fluidized bed or powder coating: the differences
These three techniques are often confused. All of them coat metal with a plastic material, but the results are very different.
| Dip coating (plastisol) | Fluidized bed (thermoplastic powders) | Electrostatic powder coating | |
|---|---|---|---|
| How it works | The hot part is dipped in liquid plastisol, then cured in an oven | The hot part is dipped in a tank of powder kept in suspension by air | Electrically charged powder is sprayed onto the part and then cured in an oven |
| Typical thickness | From less than 1 mm up to several millimeters | On the order of a few tenths of a millimeter | Thin layer, generally under two tenths of a millimeter |
| Feel | Soft, rubbery, non-slip | Hard, smooth | Hard, smooth or textured |
| Strengths | Grip, cushioning, insulation, complex shapes | Resistance to abrasion and chemicals | Appearance, wide choice of colors, low cost on large runs |
| Avoid when | Very thin layers or very fine visible details are needed | A soft feel or high thickness is needed | Cushioning, insulation or grip are needed |
In short: if the part has to be gripped, protected from impact or insulated, plastisol dip coating is almost always the right choice. If what you mainly need is a thin decorative finish, powder coating is the better fit.
Which metals can be plastic coated
Plastic coating can be applied to the main metals used in industry: iron and steel, stainless steel and aluminum. Sheet metal items, wire, tubes and welded components can all be coated.
The benefits of plastic coating
- Corrosion protection: the continuous layer seals the metal off from moisture and the weather.
- Impact and wear resistance: the coating absorbs shocks and also protects the surfaces the part comes into contact with.
- Vibration and noise damping: useful on machine components and conveying systems.
- Electrical insulation: for handles, clamps and components in contact with live parts.
- Chemical resistance: the coating withstands many chemicals; for specific needs our technical department will help you choose the most suitable material.
- Grip and soft-touch feel: the rubbery surface is non-slip and pleasant to the touch.
- Heat resistance: standard coatings work continuously up to 80 °C; for more demanding applications a technical product rated up to 150 °C is available.
- Appearance and identification: custom colors and logos help tell variants, part numbers and brands apart.
When plastic coating is not the right choice
A good supplier also has to know when to say no. Plastisol dip coating is less suitable when:
- the part must meet very tight dimensional tolerances after coating, with no masked areas;
- the operating temperature exceeds what the coating can withstand;
- very fine visible details are needed, such as engravings or raised numbers, which the layer tends to round off;
- only a thin decorative finish is required, in which case powder coating costs less.
In these cases the answer may be a different technology, or a design change: masking functional areas, changing material or thickness. This is the kind of assessment we carry out during design and feasibility analysis.
Applications: where metal plastic coating is used
| Sector | Application examples |
|---|---|
| Industry and manufacturing | Levers, handles, valve clamps, shock-absorbing protection for transport |
| Coffee machines | Wear-resistant grinder-doser accessories, decorative finishes on sheet metal |
| Fashion and furniture | Handbag chains, hanger hooks, bow tie hooks, accessories with special effects |
| Automotive | Container components, motorcycle accessories, seat parts |
| Medical | Flexible, durable coatings for handles and components |
| Electrical | Insulation of components and connectors |
Some of these projects are described in the AGB Plast case studies.
Customization: colors, logos and finishes
A plastic coating is also a product feature. Plastisol is available in a wide range of colors, including yellow, green, blue, black, gray and white, and in different finishes. On request we can also produce custom-matched colors, matte or glossy finishes and special effects: these require a dedicated compound, which makes sense when volumes justify it.
After coating, logos, text and trademarks can be applied by pad printing in 1 or 2 colors. Before coating, AGB handles the preparatory processes: sandblasting, polishing, tumbling, electroplating and painting.
Materials and compliance: what to ask your supplier
Plastisol contains plasticizers, and some phthalates are restricted. The REACH Regulation (Annex XVII, entry 51, as amended by Regulation (EU) 2018/2005) prohibits placing on the market articles containing DEHP, DBP, BBP and DIBP at a concentration equal to or greater than 0.1% by weight of the plasticized material, unless specifically exempted. For products intended for consumers, children or the medical sector you should therefore always ask for:
- the technical and safety data sheet of the coating material;
- a REACH declaration of conformity (and RoHS where electrical components are involved);
- where needed, phthalate-free formulations, which AGB has available.
How to choose a contract plastic coating supplier
Outsourcing plastic coating almost always pays off: plants, fixtures and know-how require volumes that few companies have in-house. The hard part is finding the right partner. Here is what to check:
- Experience with fixtures. Every part has to be held differently during dipping: an experienced supplier knows how to adapt existing fixtures and designs dedicated ones only when they are really needed.
- Handling of upstream and downstream steps. A supplier that also takes care of surface preparation, sheet metal work, pad printing and assembly saves you from coordinating three or four different companies.
- Flexibility on volumes: prototypes, small batches and series production.
- Documented quality control and failure analysis when something goes wrong.
- Production control. Ask how the supplier plans and tracks orders. At AGB, production is monitored by an ERP system and by planning and scheduling software that track machine use, and we work with trusted, selected suppliers: that is how we ensure reliable delivery dates.
Frequently asked questions
How much does metal plastic coating cost?
The price depends on the size and shape of the part, coating thickness, quantity, color and any additional processes (preparation, pad printing, assembly). The cost per part falls considerably with volume, because setup costs are spread over the run. An estimate requires a drawing or a sample. We cover this in detail in our article on what determines the cost of plastic coating.
How thick can the coating be?
With plastisol dip coating, thickness ranges from less than one millimeter up to several millimeters, controlled through temperature and dipping time.
Can only part of an item be coated?
Yes. With partial dipping or masking, only the area that needs it is coated, for example the handle of a lever, leaving the metal bare where it has to be welded, threaded or fitted.
How long does a plastisol coating last?
It depends on the application: abrasion, weather exposure, chemicals and operating temperatures vary widely from one use to another. That is why there is no single lifetime that applies to every case: we assess it case by case, based on the intended use. Good surface preparation remains the foundation of a long-lasting coating.
What are the lead times?
They depend on the item, the quantities and whether dedicated fixtures are needed. Agreed dates are monitored by our production planning system.
Do you have a part to coat?
Send us a drawing, a sample or even just an idea: the AGB Plast team will review the project, propose the most suitable solution and get back to you within 48 hours with a free quote.
→ Request a quote for plastic coating
Read more: AGB Plast – metal plasticization · Dip coating, fluidized bed or powder coating · Rubber coating for metal · Failure analysis and quality control